Wednesday, October 9, 2019

A Guide for Designers on the Construction

The Construction Design and Management 2015, which is also known as CDM 2015, were enacted into place in 6 th April 2015 replacing the CDM 2007. The main requirement in this act helps to provide legal requirements for the construction industry concerning the health and safety in the industry. In this view, the act helps to define the different roles of the people in the construction industry in maintaining the health and safety during working environment[1]. The CDM 2015 offers the HSE legal series and guidance on the construction industry and helps to keep the sector accident free. The HSE official has to take care of the initial conditions of the construction status and helps to control the hazards. Several rules do apply on the triangular house due to the advancement of the different hazards, which can be found on such site considering the working height. The regulations also defines requirement to have the perfect personnel for their rights jobs and be able to cooperate and coordinate the work with others. Moreover, the CDM 2015 helps the HSE official to convey the right information concerning the risks and the way to manage them at the site, help to pass the safety and health information to the right people perfectly and on time and be able to consult and engage other workers about the available risks and help to cooperate to come up with solutions on the risks[2]. In this view, the CDM 2015 requires the people to keep the construction industry accident free by maintaining the different aspects and safety issues. Triangular house must have a lift to enhance the movement due to its location that is near the road. The lift requires proper management and check up to ensure that it is secure and safe for use. In addition, it requires one to be able to pass the information concerning the risks available and help to define the solutions well. This legislation requires proper passing of information in order to enhance its effectiveness in the construction industry. The project manager has to design the proper channel for this communication and then pass it to the HSE personnel. The triangular house has several floors and therefore passing of information from one floor to another is difficult. The workers cannot be shouting to one another considering the noise at a working site. The CDM therefore stipulates for the existence of proper channel and method of communication to enhance passing of information. Through the talks, the proper message on CDM 2015 can therefore be passed and solution concerning the risks passed to the people. This will help to minimize some of the risks such as personal injuries, which can be sustained due to lack of concentration while working. In addition, passing the information that each person should be allocated the duties they are qualified on will help to minimize the injuries and risks. In addition, in order to effect this regulation effectively, workshops and trainings to ensure that workers are conversant with the tools and machines will help to attain the goals of this regulation[3]. This will ensure that proper and qualifi ed personals are allow to operate and perform their specific function, in relation with this regulation, the measure will help to reduce the cases of personal injuries and therefore providing a safe working environment. In conclusion, the client, HSE officer and project manager have great say in the health and safety of the triangular house and any other buildings as well.   In addition, the regulation can also be effected through holding proper meetings to plan and derive solutions for the available risks and problems[4]. The project manager can arrange to have these meeting and discuss the location of the specific parts such as the lift, which help to solve the problem issues. This will help to reduce risks, which may occur due to knocks by the objects on the air. Fire safety is a key element, which need to be considered in any development of a structure. Projects and measures to curb the future incidents of fire are made in advance and taken care of and provision of the key escape route of the people in the triangular house. Considering the amount of millions inserted in the development of structure of the triangular house, the fire safety becomes an important component, which must be addressed. Since the fire can destroy the structure in few hours, the addresses of the fire safety are an economical measure, which defines the incidents of fire, can be addressed to bring on minimal losses when they happen[5]. In this connection, the fire safety regulations are practices, which are brought on board to help reduce the destruction include the provision of escape routes which are enough to ensure proper evacuation. Since these regulations are meant to control both passive and active fire incidents, the provision of guidelines and warning helps to provide the solutions to fire incidents. Ignition prevention for the uncontrolled fire is one of the major design measure which is key in provision of the fire safety[6]. In order to protect the building from such incidents, the building facility is built in accordance with the building codes. Some of these key regulations include the definition of maximum occupancy of the building, maintaining of fire exits points in the triangular house and especially on the ground floor. Correct type of fore fighting machines such as fire extinguishers is essential to ensure that in case of any incident, the firefighting machines can be accessed easily on every floor[7]. In addition, the fire safety arrangement helps in providing the required alerts through the alarm systems. This ensures that people are able to evacuate the affected areas on time and therefore it shows the reason beyond its importance. The fire safety enhances the awareness of the main actions that need to be undertaken each time an incident happens. According to building fire safety regulations 2005, the rules help to reduce the obstruction, which might happen whenever the incident of fire happens[8]. The regulation provides the procedure through which the process has to take place and therefore reducing the casualties, which might happen. In addition, the floor plan must also have enough space, which must allow the movement of the people in the triangular house. The single staircase provided in the triangular house is not sufficient to allow the evacuation in case of internal fire on all the floors and emergency exits are required to ensure proper safety in case of fire. Moreover, the fire safety regulations help to define the type of structures that will be set up according to their use. In conclusion, the triangular house requires proper fire requirement for both external and internal fires. Considering it is a high-rise building, proper fire consideration is required and equipment is placed on order. This provision is provided according to the use of the structure and helps to define the duration, which the structure can withstand during fire incidents. In conclusion, the fire safety requirements have to be met because they are able to maintain the safety of structures and procedure of ensuring that all personnel in the buildings are safe. Bone, Stephen., & Great Britain. 2000. Designing for health and safety in construction: A guide for designers on the Construction (Design and Management) Regulations 1994. Sudbury: HSE Books. Cassidy, Kevin A. 1992. Fire safety and loss prevention. Boston: Butterworth-Heinemann. Construction Industry Training Board (1963-2003). 1995. CDM: The view from here : the Construction (Design and Management) Regulations. London: CITB. Great Britain. 1995. Managing construction for health and safety: Construction (Design and Management) Regulations 1994. Sudbury, Suffolk [England: HSE Books. Hughes, Phil, and Ed Ferrett. 2016. Introduction to health and safety in construction: for the NEBOSH national certificate in construction health and safety. Joyce, Rose. 2001. The construction (design and management) regulations, 1994: Explained. Ludhra, Subash. 2015. Common sense guide to health and safety in construction. Construction Industry Training Board (1963-2003). 1995. CDM: The view from here : the Construction (Design and Management) Regulations. London: CITB. Rose, Joyce. 2001. The construction (design and management) regulations, 1994: Explained. Stephen, Bone., & Great Britain. 2000. Designing for health and safety in construction: A guide for designers on the Construction (Design and Management) Regulations 1994. Sudbury: HSE Books. Great Britain. 1995. Managing construction for health and safety: Construction (Design and Management) Regulations 1994. Sudbury, Suffolk [England: HSE Books. Robert, Ratay T. 2012. Temporary structures in construction. New York, N.Y.: McGraw-Hill Education LLC. https://accessengineeringlibrary.com/browse/temporary-structures-in-construction-third-edition. Subash, Ludhra. 2015. Common sense guide to health and safety in construction. Kevin, Cassidy A. 1992. Fire safety and loss prevention. Boston: Butterworth-Heinemann. Phil, Hughes, and Ferrett Ed. 2016. Introduction to health and safety in construction: for the NEBOSH national certificate in construction health and safety.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.